Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
7,526 Posts
bring the engine up to TDC ither by hand or bumping the starter.. you'll see the valves on cyl 1 close 1 at a time. when the second valve closes. turn the adjuster nut on the rocker to adjust it. you'll need a .016 feeler gauge.. adjust the valves to .016 clearance.. rotate to the next cylinder and do the same thing, and just keep doing that till you got all 6cyl's adjusted
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top