Hot Rod Forum banner

need help on how to rebuild a 4l60e on a camaro

2386 Views 8 Replies 4 Participants Last post by  SSedan64
hi i have a 4l60e that i want to try to rebuild but i cant find any sites on how to do this can any one help me thanks
1 - 9 of 9 Posts
camarov6ss said:
hi i have a 4l60e that i want to try to rebuild but i cant find any sites on how to do this can any one help me thanks

There are books and videos to purchase that help a DIY to replace parts in the trans. :cool:
4l60e

is there any sites you know of and do you know how to rebuild this 4l60e
camarov6ss said:
is there any sites you know of and do you know how to rebuild this 4l60e
I do not know of any site that would be comprehensive enough to take a novice through a 4L60-E step by step.

ATSG books are very concise. Haynes books are ok too. It's ok to read books. :D
camarov6ss said:
is there any sites you know of and do you know how to rebuild this 4l60e

Buy a book or find competent help on the 4L60e trans... many areas of the valve body need addressed/ checked during a rebuild besides replacing parts the DIY will do.

I build transmittins for a living... about 200 of the 4L60 trans a year among the other stuff. :cool:
4l60e

ok thank you this will be my first time doing some thing like it is there any tricks you can tell me about
Tricks...hmm. Those really have to be learned by the individual. My tricks may not work for you and vice versa.

A few:

Take detailed quality digital photos for reference. Note any and all witness marks on hard parts, especially pump vanes. Reinstall hairpins that secure solenoids from the bottom up when the VB is disassembled. Never wipe parts off with 'rags'. Clean and forced air dry only.

Tools, books and specialty tools lessen the need for 'tricks'

ATSG has an update handbook for 4L60E and 4L65E. Might consider this one as well as a basic teardown & reassembly book.

Intelligence is a good trick too. :thumbup:
4l60e

ok that is helpful thank so now i have some what an idea now. but i came across another problem my car pushes 500hp and the rebuild i was getting turned out to be a stock one what should i do when i am making that much hp
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top