Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
121 Posts
Discussion Starter · #1 ·
I need recommendations for a car model that uses strut type front suspension with spindles that have the steering arm forward of the front spindles steering axis. I plan to retrofit the strut assemblies into a 3300# PT Cruiser being converted to RWD. It would be a plus if drum brakes were available for these spindles and 5 on 4.5" bolt pattern would also save effort. Part of the plan is to replace the lower control arms so there is no need for compatability with the stock PT control arms .

PS -- If anyone else ventures this path a front clip might make a lot more sense, but it is too late for me.
 

·
Registered
Joined
·
5,784 Posts
5.0 mustang

the 5.0 mustangs use front steer and Lincoln 5 bolt 4.5 hubs fit on 87 and later but are disc, they make a tubular crosmember for racing 5.0's I think hotrod magazine had V8 PT"S google it.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top