Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hi there,Long time no talk.Is there anybody who knows what the measurements are for the oak bed wood parts? I know y need 8 pieces of 2 meters long but do they have to be 15cm,or 18cm width and 1 or 2cm thick.
Can,t find them anywhere.
Thanks in advance.
 

·
Administrator
Joined
·
18,635 Posts
I take it you want to make your own floorboards. In my 51, which has the same sized bed, I used a piece of diamond steel plate for my floor. It was 4ft wide (122cm) and was a perfect fit. Divide that by 8 and you get 15.24 cm..........But are you going to put steel runner strips in between? The width of the part of them in between the boards will decide how wide your boards are.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top