Hot Rod Forum banner
1 - 2 of 2 Posts

·
Just a firefighter
Joined
·
324 Posts
Discussion Starter · #1 ·
Well as I've said before I was going to make the running boards for my '46 Chevy Panel from oak and today was the first test fit. Have to do a little fine tuning on the fit around the rear fender but it fit nice. I also messed up the finish from glue expanding out, stained and dyed them first, but I can fix that with no problem. And I still have to add the front lip. After fixing them it will be 5 coats of Marine grade clear varnish for a slick, shiny finish :thumbup:

http://hotrodders.com/gallery/showphoto.php/photo/26049/size/big/cat/500/page/1

http://hotrodders.com/gallery/showphoto.php/photo/26048/size/big/cat/500/page/1
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top