Hot Rod Forum banner
1 - 1 of 3 Posts

· the 'Duracell Project'
Joined
·
3,948 Posts
any compressor will introduce oil into the air lines, if you don't filter the oil out for spraying it will cause havoc
air lines should gravity drain to a low point, the oil will gravity drain out the same way
you can assist this by removing the air fitting at the end and opening a 1/4 turn ball valve at the compressor
definitely wear hearing protection when doing this :eek:
 
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top