Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,311 Posts
Discussion Starter · #1 ·
does not enough reducer in enamel cause more orange peel? im painting black satin and used 3 to 1 ratio and didnt turn out good, would 2 to 1 or half and half be best. im new to doing paint and body so is there any trick to avoid orange peel? im using sherwin williams satin black enamel.
 

·
Registered
Joined
·
10,928 Posts
Generally orange peal is gun adjustment, but too little reducer can make it difficult to lay down a smooth finish. The young man I had apply the final coats of clear to my 34 body over-reduced the last coat of clear and it laid out as smooth as any finish I have ever seen and required minimal color sanding.

Vince
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top