Hot Rod Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
after much web searching and reading, i decided on the devilbliss finishline II as my weapon of choice, but i dont know what kind of other supplies i need to keep the gun in good shape...

is there a special cleaner i need? in line air filter? anything else?

i appreciate any advice anyone can give...

Eddie
 

· Registered
Joined
·
5,893 Posts
an assortment of brushes in various sizes to clean your gun with., I use lacquer thinner as a solvent to clean my gun with.

definately get an air line drier. i use one that mounts to the wall about 8 ft from my compressor. i need another one at the terminal end of my air line too.....

a paint gun stand is real handy. my paint guy wanted way more than i thought it was worth so i made my own out of scrap i had laying around...

and DO NOT let your gun dry with catalyzed paint in it as that will make it a booger to clean. (can we say booger on this site?)

good luck, i'm about ready to lay my paint too, well see how it turns out.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top