Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
I am putting a street rod together and the fitting on the master cylinder booster is for 9/16 vacuum hose and the fitting on the engine is for 11/16 hose. I have a 11/6 fitting for the booster, does it make a difference? Or Should I change the engine fitting to 9/16 and run 9/16ths hose? The master is under the floor.
Thanks!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top