Hot Rod Forum banner
1 - 1 of 9 Posts

· Registered
2,036 Posts
Depends on the rear suspension. If you are running leaf springs then you must account for the pinion walking up the ring gear and causing the pinion angle to change. Say the trans is 3 degrees down, then the pinion in this case should only be about 1 degree up. Triangle 4 bar and parallel 4 bar will not change so match (offset) the pinion to the trans.
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.