Hot Rod Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
do you know which diff this is and in which cars it would fit?
It was in an axle of a 1981 caprice station with a 10-bolt diff cover. But it looks like a 12-bolt diff.
Please give me an idea.





thanks

sportsman69
 

·
Not Considered a Senior Member
Joined
·
10,722 Posts
If memorey serves me right, you have a 8.5 inch 10 bolt limited slip diff. 12 bolts hold the ring gear on, 10 bolts on the outer cover. the 8.5 was the only one that used a 30 spline pinion gear. the ratio of this set is 2.56:1 by 41 divided by 16 = 2.56
I believe it`s what you have anyway, but don`t quote me on that.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top