Hot Rod Forum banner
1 - 1 of 1 Posts

· Registered
52 Posts
do not use epoxy it will not hold up to sunlight.if it was me i would buy inexpensive single stage paint and add flattening agent to it. check with someone who sells ppg paint they have a fleet line of paint called omni its very inexpensive. you can buy it in single stage. buy the quart. you can also buy inexpensive sealer from omni. if you are doing it in your garage make sure buy the fastest drying reducers and hardners. collins motors
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.