I'm considering selling my top end. Here's what you'd get:

Profiler tunnel ram, ported to fit heads, single and dual carb tops, 10.2" deck
Profiler Hitman heads, custom ported.
Profiler Valve covers
Jesel Pro Series Rockers, 1.85, 1.8 ratios
Sideways carb linkage and misc parts.
Comp Cams +.400 belt drive with extra NEW drive belt and front dist drive adapter
Jesel front drive dist for raised cam

Can include two 1295 King Demon RS carbs, two circuit conversions, matched as a pair for additional cost.

Heads do need valve job, #7 intake valve has some damage on the tip, but has lash cap on it and I've ran it for 3 seasons now no issues. All the valves are Ti and have steel tips.
Ports are custom and matched to the intake

No valve cover, header, carb, or head studs will be included.
Intake has two sets of bungs, 1/8" pipe. One set in cast bosses and another set welded above those in the runners.
Intake valley floor has 1/8" pipe thread hole for vacuum fitting to watch crankcase vacuum.
Intake will include phenolic spacer for plenum.

New, this entire package would cost you over $20,000.

If interested, please pm only!!!
NO, I will not give it away, if you're SERIOUSLY interested, make me a SERIOUS offer.....


All parts are currently installed on the vehicle. I can provide pics upon request.