Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Got an e-mail asking me to introduce myself, so thought I'd show my current project to date. I'm building a 65 Corvette. You can't call it "rebuilding" since all I started with is a bare body (no floor, fiewall, or other interior panels) and frame rails. It just turned the corner and went from fabrication/mock-up into assembly mode, so there is hope that I will get it running sometime. I previously built a 27 'T' and 32 roadster, but they were before I was married when I had a lot more time to work on them.

Anyway, here's a link to the projects home page.

-Greg

http://corvetteforum.net/classics/gregp/65corvette.htm
 

·
Registered
Joined
·
721 Posts
There is always a light at the end of the tunnel. Sometimes it's daylight and sometimes it's a freight train. Keep the faith, look in my gallery and you'll see that I started at the same place and I'm driving my 74 Vette now. Good luck.:thumbup:
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top