Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
413 Posts
Not sure about how to salvage it, but here's a tip I learned if you want to leave it in place: pull the rubber back and insert a thick rope between the rubber and the body. Then you can tape/mask it off and sand/paint behind the rubber. After the paint is done, pull the rope out. Hope this helps. :welcome:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top