Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
64 Posts
Discussion Starter · #1 ·
I am replacing the bushings on the front shackle on my 59 Chevy pickup. The right side pin that is in the frame came out but the bushing is stuck fast. The left side, pin and bushing are froze. I'm figuring heat, and lots of it. Any advice from those who have done this before with this kind of problem? I thought there may be a trick or two out there to make this easier.
Thanks,
Dave
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top