Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
785 Posts
bugsy,

i don't know if you'll want to try this, but i used to have a motorcycle and one of the side panels had these plastic mounting pegs on it and one of them broke off. I tried several times to fix it but what fixed in the end was this: i just bought a 2-part epoxy-resin glue. I sanded the area and cleaned it good. Then i mixed up the glue and put that down, but i also layed duct tape over it and glued that as well. after it hardened it was great. It never broke off after that, the duct tape seemed to reinforce it really well. You may not want to do it this way, depending on how much room you have to make the repair, as well as how visible it is from outside the car.

JB
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top