Joined
·
132 Posts
rhs pro torkers best head for the price on a 350 bored .030 over roller cam?
rhs pro torker or....
1 - 8 of 8 Posts
The RHS Vortec & Pro Torker Vortec are very good value>> http://www.competitionproducts.com/Cast-Iron-GM-Vortec-Heads/products/1262/
Joined
·
3,109 Posts
How about these? http://www.jegs.com/i/Patriot-Performance/723/2169/10002/-1?parentProductId=1250658
And they're aluminum!
And they're aluminum!
Joined
·
22,051 Posts
Just be aware if you go aluminum that there are different head gasket requirements, and you need head bolts with a washer to protect the bolt seat area from galling, so that adds to the cost. Patriot heads are chinese castings, but assembled here in the US.
Joined
·
132 Posts
the rhs heads from comp. products on the above link, are these designed for roller motor? isent there a difference in parts the heads are assembled with for roller/ non roller?
Joined
·
22,051 Posts
Only the valvespring requirements, otherwise no difference.orangechronic said:
ain: 1 - 8 of 8 Posts
