Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
17,613 Posts
The widest lash used on any CompCam solid roller is 0.028" intake hot, 0.030" exhaust hot. If I had a cam installed that didn't have a cam card with it, that's where I'd set them to start. Then I'd tighten 'em up a little at a time until I burned a valve, then back off a little. NO, NO, just kidding.

Get the number off the stick and call Comp.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top