Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
299 Posts
Those are the mounts I have on my 82. I’m in the process of correcting some issues with the engine setup. Currently trying to figure out how to rework my cooling and will probably be cutting the upper support too. Radiator and electric fans fit, but I only have about an inch clearance to the pulleys and no shroud so it runs on the warm side. Eric and Bogie have given me some great advice. Best I can tell you is if you think you might need to do something do it the first time around.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
299 Posts
It’s a first gen, but here’s the clearance with the engine mounted all the way back. My radiator is just a hair too big to recess, so I’m waiting for a non rainy day to pull it out and clearance the upper support. This is how I got it btw and it runs about 215. I want to find a Taurus fan and shroud.



Sent from my iPhone using Tapatalk
 
1 - 2 of 2 Posts
Top