Hot Rod Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
323 Posts
Discussion Starter · #1 ·
hello can anyone tell me what i can use to check for a vacuum leak on an edelbrock carb and intake with the endurashine finish. i seem to have a vac. leak and can hear it but can't seem to find it . thanks
 

·
Registered
Joined
·
17,613 Posts
Easiest and cheapest is a spray can of WD40, although it is a little messy to wipe up the lube. It has propane in it. An alternative is a propane bottle with a small diameter hose attached to move around the manifold. Take all matches and cigarette lighters out of your pocket and the pockets of friends who will be anywhere in the area.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top