Hot Rod Forum banner
1 - 1 of 1 Posts

·
ASE Master
Joined
·
246 Posts
Instead of using sand I use a crushed glass, The product is made locally called Alaska Gold. I would think you could get it where you live. Any moisture in sand is a problem. I just did my 36 Ford coupe, all parts of the body. Took whole day. I swept the glass up and reused it 2 times before it was too fine. It cost $6.00 for 100# bag. Used 6 bags but better with 10. Also trick with blaster. Let the pressure pot fill with air til compressor shuts down, turn on air through gun with no sand to start, then slowly turn on sand and not full open or it will plug nozzle, turn up air as needed then more sand but not full sand. When you shut down sand purge it out first by shuttting off sand then air when sand is out of hose. Ive had to run sand through speggetti strainer before to get out chunks with bad sand.Hope this helps. Ray
 
1 - 1 of 1 Posts
Top