Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
14 Posts
It's also very important to place the filter (air dryer) 20-25 feet from your compressor. The air coming out of your tank is likely to still be hot. Water forms when the compressed air cools down. If the air doesn't have a chance to cool before entering your filter, it will release the moisture when it does cool down. Unfortunately, that can be after it has already run through your filter. My filter is bolted to the wall and I run a 25' 3/8 hose from the compressor to the filter. That solved my sand blaster problem.

Good luck,

Steve
 
1 - 1 of 1 Posts
Top