Hot Rod Forum banner
1 - 3 of 3 Posts

·
pacman350
Joined
·
39 Posts
Discussion Starter · #1 ·
i have a sj 327 that has stock bore flat top pistons, patriot performance iron 185 cc vortec heads with 64 cc cumbustion chamber, comp thumpr cam, weiand stealth high rise vortec intake, comp cam magum steel roller tip rocker arms and i wanted to know at about what hp and trq range i might be in. im looking forward to you guy answers, thanks in advance
 

·
Registered
Joined
·
4,018 Posts
The best way to find the estimated power from a 327 is to find the dyno results from a similarly built 350 then multiply the 350 output by 0.93 to get the 327 output.

You should include the cam specs as there are a few different thumpr cams.

Compression will be low (for a big cam). A 327 with flat tops and 64cc heads will make around 9.4:1 cr.

Headers?

Carb?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top