Hot Rod Forum banner
1 - 4 of 4 Posts

·
Hates: Liver. Loves: Diesel
Joined
·
6,307 Posts
I like vortecs, which are 062, 885, 906, and... whats the other one? They have slight differences; the 062 has slightly smaller ports, 885s are talked about a lot but I've never actually laid eyes on a set. 906 are the "good" ones for flow by a tiny margin, but they all have reportedly thin decks. Some say its a sure-fire recipe for cracks while others say that they don't crack despite the thin decks. I have two sets of 906s so I'll let you know :)

Other half-decent SBC heads I like are the 462s. Nice flow from moderate valve sizes and a 62cc chamber.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top