Hot Rod Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter · #1 ·
I thought this might be interesting to at least a few people here.

I had a chance to work with Quarter Master on a video showing a quick and easy way to make sure the clearances are properly set for a hydraulic throwout bearing on a manual clutch. If you are interested, here's the link:

www.HorsepowerMonster.com

Let me know what you think.

Thanks!
 

·
Evil Wicked Mean And Nasty
Joined
·
13,765 Posts
I thought this might be interesting to at least a few people here.

I had a chance to work with Quarter Master on a video showing a quick and easy way to make sure the clearances are properly set for a hydraulic throwout bearing on a manual clutch. If you are interested, here's the link:

www.HorsepowerMonster.com

Let me know what you think.

Thanks!
Yes and thank you for posting this it will come in handy.:thumbup:


Cole
:pimp:
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top