Hot Rod Forum banner
1 - 4 of 4 Posts

·
Stuck in the 30's
Joined
·
120 Posts
Discussion Starter · #1 ·
I'm working on a 1936 Chevy Master 2 door sedan. Check out my journal, if you need a picture.

I have shaved all door handles, hidden hinges, etc. Now I'm working the original hood and have two more handles to deal with. I'm stumped on how to do this. Looking for any ideas that will help.

Appreciate any ideas at this point.
 

·
Registered
Joined
·
1,189 Posts
You can possibly remove the handles, cut off the portion that sticks out of the hood and weld a allen head bolt head on there so the hood can be opened by a hex handle you make from an allen wrench. Simple, unobtrusive,and pretty smooth.
 

·
Stuck in the 30's
Joined
·
120 Posts
Discussion Starter · #4 ·
Hot Rod 47 sorry I wasn't specific enough. I'm looking to eliminate the handles on each side of the original hood. Since everything else has been smoothed I don't want two handles sticking out of the hood sides.

pasadena hot rod came up with a good idea. Looking for a number of ideas to decide between.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top