Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
360 Posts
Discussion Starter · #1 ·
As a novice at this, I need to get my ducks in a row , so to speak.

I have a coat of epoxy primer on the bare metal. The bondo / fillers will go on top of this after a scuff.

After blocking the layers of fillers, should there be another coat of epoxy primer or sealer coat that goes on before the 2K High build primer?

Or if necessary, should this go on after the high build has been blocked?

What I am worried about is that the fillers underneath will have different absorption properties, or am I worrying for nothing?
 

·
Registered
Joined
·
360 Posts
Discussion Starter · #3 ·
Thanks. I believe you are right. I anticipate that the seam where the quarter panel was flanged and welded, once filled, will need to be hammered, tweaked and re-epoxied (primered)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top