Hot Rod Forum banner

single stage urethane

884 Views 2 Replies 2 Participants Last post by  mordantly
I have a qt of mont senoir cross fire made and sealed about 4 or 5 years ago from napa. Open it today and it is half empty. What solvents it had evidently evaporated through the plastic can.

Can I add the missing 10 ish oz as reducer?

How long should it be able to be stored when newly filled/sealed?
1 - 3 of 3 Posts
You can try to thin it back out with some more reducer.

You might want to hurry up and use it after that. Also, spray out a test of it before you paint something you like with it. That way you will make sure that it kicks off like it should and everything else is good with it...
It looks about 10 or 12 oz light. Yeah, I just want to play with mygun on non critical stuff.
  • Like
Reactions: 1
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.