[jdss]

I've got two coats of Spi epoxy on now.Its seven days old today.Do I need to scuff it and shoot another coat of epoxy before I spray on Spi 2K??

 

[BarryK]

No just scuff 180-320 and go to primer. Before 10 days.

 

[jdss]

Thankyou for the info Barry,however I've run into another problem.There was a couple of spots that looked like they needed filler so thats what I did.Now I've sanded through the epoxy down to the bare metal.I assume now I should scuff the whole area and shot another coat of epxoy before the 2K?

 

[BarryK]

If they are the normal 1-2 Inch size type missed ping dings, I would most likely just go to the 2K. If bigger than may be a good idea to coat with the epoxy.