Hot Rod Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 · (Edited)
Just a few progress pics to point out some of the spacing issues we had.
Lt1 with 4L60e in pinched 32 rails. Even with the Hooker Block Huggers we ended up with 3/4" spacing on each side.

Wheelbase set at 107"...even with that we needed 2" setback on the firewall.

Cardboard mock-up for fab planning (in progress)
 

Attachments

·
Registered
Joined
·
3,518 Posts
That should to be a nice A bone when you're through, looks like you still have plenty of room up front. You ought to try a 507" Cadillac in a '32 chassis....never work in a pinched application though, I will have to have hood blisters on mine to clear the headers....
 

Attachments

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top