Hot Rod Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
stock 305 with an edelbrock rpm performer intake and a edelbrock carb. would it be a good idea to put a stall converter and what size whith this app. yes i know its a 305 but lets see what we can get out of it. Keep in mind that i drive it every day for work.
 

·
Some Punk Kid
Joined
·
786 Posts
Well the stall is mainly determined by the torque of the engine. So if you get a 2500 stall it may only stall out to 2000. It will still help a little if you want that little extra at launch. Also with the 305 you could get away with running the value line B&M torkmaster or the hughes street.
 

·
Registered
Joined
·
5,653 Posts
:)

While this ... IS ... a general rodding type of question ... IMHO ... as Moderator I am moving it to the transmission area ... more views and for more responses ... from transmission types ... :D

Deuce Moderator
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top