Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,726 Posts
If you can't find one, I've used the rubber seals from old pickups that had tanks behind the seat. They are also made to sit at an angle, and easily found at various truck suppliers. If they are slightly large they can be split at the bottom and a wedge cut out to make them smaller and easy to install without pulling the column.


$5 at Classic:
http://www.classicparts.com/1949-54-Gas-Tank-Filler-Neck-Grommet/productinfo/23-013/
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top