Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Moving on with mods to the 390 heads,intake, carby cam, now thinking of going "whole hog" with a stroker. Appear to be lots out there-looking for good street perfomance for my "Leadsled" (As another TBird owner described em ! )
Cheers from Downunder,
Johann:thumbup:(horn)
 

·
Registered
Joined
·
15,619 Posts
Moving on with mods to the 390 heads,intake, carby cam, now thinking of going "whole hog" with a stroker. Appear to be lots out there-looking for good street perfomance for my "Leadsled" (As another TBird owner described em ! )
Cheers from Downunder,
Johann:thumbup:(horn)
Don't know for sure what this engine is headed for, if this is a street driven T-Bird yes it could use the inches provided by the 445 stroker kit. This adds a lot of torque from the bottom end through mid range RPMs. Just keep in mind that the FE isn't a high winding engine to start with and a 4.25 inch stroke is not going to improve that aspect of this engine.

Bogie
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top