Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
i know this isnt a hot rod but i need your healp please if you can .i have a 1985 suabru gl wagon and half of my vacume lines are dead at intake.have replaced all bad vacume lines.the ones that do work seem to get week while running like vacume advance and vac line to tranz .can you please healp or have eany ideas. thank you for your time and god bless
 

·
The Smell of Nitro in the morn
Joined
·
2,411 Posts
Replace ALL the vacuum lines, the fittings can also be plugged.
Sometimes when replacing the line it can sliver into the fitting when pushing them on and plug the line, when pulled off you will never notice it.
Make sure there is vacuum when you pull the line off at the fitting,
do one at a time, if its a ported line it won't have vacuum until it gets more RPM.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top