Hot Rod Forum banner
1 - 1 of 1 Posts

·
Administrator
Joined
·
10,152 Posts
I have not re-installed a silencer plastic ring in a T-400 for at least 25 years. I doubt that is the cause of the noise even if the plastic bits were going thru the gear teeth. I suggest an open and look see for a problem. Often drive line problems or rearend failures will damage the rear case bushing of the T-400 that supports the output shaft.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top