Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
222 Posts
Measure the cab. You have a pix of the white one i beleive.The AD cab doesnt like this deal very much.Its a hard one to pull off as the cab is a wedge.If this is your first Mig/plazma project i would do a rethink.the big guys have a real hard time with this one. I have only seen one that came close to looking OK and it was not all that great.Think i would look into a burb or panel(you could use a rusty one as the roof is the big deal,plus you will get a long frame) I bet a rusty panel truck would be a good start.But like i said get your welding and cutting skills in good working order before you try to pull this one off.Its a complete body build not just a little nip and tuck.Now that i think about it the panel with a donor rear panel really would be the way to go.You need to get a 3/4 or 1 ton frame anyway for the gooseneck.
 
1 - 1 of 1 Posts
Top