Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
15,631 Posts
is anyone running 350 hot cam with 906 vortec heads flat top pistons with ls6 springs. and what hp can be expected ?
Depends on rocker ratio, porting, intake and exhaust systems and other things about the details.

Generally a 350 with the LT4 HOT cam, 9.5 compression with 1.6 rockers, well ported Vortec heads, Edlebrock Performer RPM intake with a 750 Holley, and 1-3/4 inch long tube headers should pull in the range of 400 to 420 hp on an engine dyno.

Bogie
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
i am trying to stay with the tbi unit if possible or going to a big block tbi and a diffrent chip dont know on the headers yet. just a low budget project for me and the son. trying to find out his intrest and us do something together
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top