Hot Rod Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
4 Posts
Tekna spray gun w/7E7 air cap, 1.2mm 1.3mm nozzles

This is a Tekna spray gun with a 7E7 compliant air cap that comes with a 1.3mm and 1.2mm needle and nozzle sets. I have a variety of cups available if wanted, 600ml astro cup or 1000ml generic cup. I bought the gun new but unboxed, and it has not been used and is in MINT condition save for a tiny chip less than 1mm in length in the nickel plating from a slip while loosening the brass cup adapter from the gun, it is rite at the top of of where the cup threads into the gun. All I have done with it was inspect, oil the gun, and hooked it up to my compressor to be sure it works.
I have collected too many guns and have to sell some. I do not have the box, but have the original wrench that comes with the gun as well as the blue, red, orange, yellow and black rings to mark the guns use.
I will also throw in either a 1000ml generic aluminum cup with brass adaptor I had to rethread to fit perfectly into the gun, or a 600ml star brand cup, both cups are devilbiss bag liner ready. And I will include 10 solvent resistant bags with 10 inserts to attach bag to cup. If any parts are not wanted or needed I will negotiate on the price some.

Asking Price: $300.00
Condition: Excellent

Location (City, State, Country): Rochester, MN, USA
 
1 - 1 of 1 Posts
Top