Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
380 Posts
Discussion Starter · #1 ·
Im replacing my track bar brace, but I have yet to find one. Im replacing it due to rust, and I find it hard to believe with all the performance parts made for a camaro there is no such thing as an aftermarket track bar brace/panhard bar brace. Any other names it might go by? or another suitable replacement part?
 

·
Registered
Joined
·
181 Posts
I would probably think the brace was part of the track-bar kit. If you have the available equipment (welder,torch set,etc.) you could manufacture it, if not go to your local machine shop with the old one and they will duplicate it.:thumbup:
 

·
Registered
Joined
·
380 Posts
Discussion Starter · #3 ·
I wish it were that easy.... panhard/track bars are sold indivualy... and the brace is just as long as the bar.. almost identical to the bar except for one side being flat rather than round.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top