Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
427 Posts
It depends on your skill level and the amount of patience you have.
It is a doable project but could take awhile.
Some stuff you will need.

transmission.
flywheel.
pilot bearing.
clutch assembly.
bell housing.
cross member.
drive shaft.
inspection cover.
steering column.
( you need someplace to hang the clutch pedal from)
shifter.
clutch linkages.
These are the items just off the top of my head.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top