Hot Rod Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter · #1 · (Edited)
i am trying to find out what the compression is on my 350 with

stock 350 flat top pistons,305 (601) heads

also what kind of horsepower am i looking at with

350 stock pistons
305 heads
ed performer intake
ed 600 carb
comp cam 292 dur 292 vlift 501/501
summit headers and 3" dual exhaust

just kind of curious
 

·
Banned
Joined
·
9,993 Posts
campracing said:
i am trying to find out what the compression is on my 350 with

stock 350 flat top pistons,305 (601) heads

also what kind of horsepower am i looking at with

350 stock pistons
305 heads
ed performer intake
ed 600 carb
comp cam 292 dur 292 vlift 501/501
summit headers and 3" dual exhaust

just kind of curious

There are many types of "stock" pistons, do you have a part number, or atleast the factor engine code. Also, need to know the head gasket you used. Can assume around .025 deck clearance- unless you know otherwise, again a piston part number is useful here.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top