Hot Rod Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
does any body know of any good tube nothchers and tube benders and where i can get them . i will be working with 3/4", 1", 1 1/8", 7/8", 5/8" with wall thicknesses between .065 - .125.

your help would be greatly appreciated
 

·
Registered
Joined
·
2 Posts
Originally posted by l1o00o1l:
<strong>does any body know of any good tube nothchers and tube benders and where i can get them . i will be working with 3/4", 1", 1 1/8", 7/8", 5/8" with wall thicknesses between .065 - .125.

your help would be greatly appreciated</strong><hr></blockquote>

[ May 22, 2003: Message edited by: American Bender ]</p>
 

·
Cad Power rules!
Joined
·
23 Posts
check out the pro tools model 105 and the jd2 or jd3 bender. I have friends with both and those are the standard in the rockcrawling world. Do a google search or check out rockbuggysupply.com or lowbucktools.com IIRC both sell the bender and notcher you'll want. Stay away from "pipe" benders such as the harbor freight or greenlee. they can be cheap but they are not designed to bend tubing.
 
1 - 5 of 5 Posts
Top