Tube Bending Guide - Hot Rod Tech - Hotrodders Knowledge Base

288 Views 0 Replies 1 Participant Last post by VS-Admin, Aug 25, 2020

12-31-1969 07:00 PM
URL:	http://www.pirate4x4.com/tech/bendin_tube/
Description:	Guide to tube bending, including using levels, protractors and tape measures to bend a pipe properly and at the proper length that is needed.
Category:	Metalworking
Tags:	None
Views:	58
User:	Guest
Send to Friend

1 - 1 of 1 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.