Hot Rod Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Can u bend 90 degree and 180 degree angle with the method of using a piece of wood that has a 90 degree or 180 curve in it?
 

·
Registered
Joined
·
1,353 Posts
Like I said in the PM reply, yes. You can bend any peice of tubing you want to any shape you want using the wooden form or a steel jig and a heat source or a haydraulic press and the right mandrel.

HK
 
1 - 2 of 2 Posts
Top