Hot Rod Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Just built my first automatic> No power @ take off, second works, and drive works under no load. very frusterating:pain:
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
T/H 350 issues

I did not replace the torque converter. The old tranny filled with antifreeze and smoked the clutches. yes the kick down cable is adjusted and i tried two differnet valve body's and two vacuum modulators. I am think now that the sprag(???) roller bearing are in backwards. Just a guess though. thanks for the info and I'll keep searching
 
1 - 3 of 3 Posts
Top