Valve Cover Question

540 Views 2 Replies 2 Participants Last post by Camaro2, Jun 11, 2009

Camaro2

Discussion Starter · Jun 11, 2009

Does anyone know? I've got a 383 stroker (in an 84 Camaro) running Brodix heads with proform roller rockers, does anyone know, if I use the tall Brodix valve covers will my AC brackets still work? With the roller rockers I think I will need the taller covers. The tall cover measure 3. 009 tall, the short are 3.0064. My motor is still being built therefore I can't measure.

Save

1 - 3 of 3 Posts

Jsup

· #2 · Jun 11, 2009

Camaro2 said:
Does anyone know? I've got a 383 stroker (in an 84 Camaro) running Brodix heads with proform roller rockers, does anyone know, if I use the tall Brodix valve covers will my AC brackets still work? With the roller rockers I think I will need the taller covers. The tall cover measure 3. 009 tall, the short are 3.0064. My motor is still being built therefore I can't measure.

There's different definitions of "tall".

Proform makes one that is just about 1/4 inch taller than stock. They will work.

Those are the shortest tall covers I am aware of.

Save

Camaro2

Discussion Starter · #3 · Jun 11, 2009

Thanks

I spoke with someone at Brodix who gave me the numbers; I may have screwed it up. The numbers he said he gave me were for the end of the valve cover, not near the Logo. Perhaps it was 3.090 and 3.064?

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month