Hot Rod Forum banner
1 - 1 of 1 Posts

· Shop Owner And Troll Hunter
Joined
·
3,087 Posts
For best results,bc,cc paint should cure for a mo. or longer,this is for shrinkage,before sanding.

Most commercial paint work,if it needs sanded is done within a few hours and polished or glazed. I
recommend 30--60 days before sealing and waxing.

If sanded within 12 hr.the paint is still green
and soft(makes easer sanding).Most new paint systems vent the thiner and fums rapidly, of course a lot depend on conditions,humidity,temp and so on.

Custom paint sanded and buffed early will still be shrinking, and need to be redone in a couple of mo.

I have three show cars,they have never been waxed,just glazed.I wax my drivers and beaters
to protect them from the elements.

NEVER NEVER USE SILICONE BASED POLISH OR WAX!!

Refer to paint mfg.tec sheet, Good Luck

69s for ever; TC;
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top