Hot Rod Forum banner
1 - 5 of 5 Posts

· Premium Member
Joined
·
15,533 Posts
What are you trying to learn on... If it's a 110 unit,, It will be harder to learn on....The right machine has a lot to do with it...I had guy's come to my shop that bought some small machine and was having a hard time learning,,, I took about 15 Mins on my machine with them and they couldn't believe just how much better they was in ONLY 15 Mins..;)
 

· Premium Member
Joined
·
15,533 Posts
not sure if I confused him more than I helped. Well at least I wasn't posting up frequency waves and crap like that.
No !!! It's just sometimes people post things here that will make some people think they can't do it... I didn't take any school at all,,(self tought)..I got certified in many different type's of welding... A lot of what I was certified in was X-Ray weld's.. If you have the WANT to learn,, You WILL learn..Yes some schooling will help jump start you... But you can move forward witout it.. ;)
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top