Hot Rod Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
Hey everybody, wow is there some great info here I'm glad I'm a member. Here is my question. I'm trying to figure out what my HP would be on the motor that I built.

Here are the spec
406 small block chevy
10.5/1 compression
holley street avenger carb 780 cfm
Vortec heads
Lunati Vodoo series cam part number 60104
spec are .504 intake lift .525 exhaust lift
Long tube headers with flowmaster exhaust 2 1/2 inch

If you guy's need anymore info please let me know.
I was coming up about 425hp I kind of thought this was a little low, but maybe not.

Thanks agin everyone
 

·
Registered
Joined
·
30 Posts
Discussion Starter · #4 ·
Yeah that's what I was thinking. It's going into a Jeep, that's going to be more of a show vehical than anything else.

I think my heads are really holding me back on this motor. This winter I am going to put on a set of AFR's. I think that should wake her up a little.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top